★★★★ 62 real customer reviews average rating: 4.4 stars
5 Stars By Jeff R. on 2017-02-06
I am actually glad that it was a little longer than needed
Product was as described and should work for most applications when adding a swivel and sling. For the machine screw and nut, I am actually glad that it was a little longer than needed. As the manufacturer there is no way of knowing how long this screw needs to be for each application. If it's too long, use a Dremel or hacksaw to cut it down and then dress the end of the screw so the nut will fit. For me it's better that it's a little long, but I can see for some that are not experienced in cutting down screws were this might be a problem! Looks to be decent quality product for the task.
4 Stars By James on 2017-09-16
Hey, they're sling studs. Nice sling studs. With washers. And there's 3 of them.
They lose a point for no instructions. Other than that, good product. I guess if you know what you're doing, instructions are superfluous. They could have specified a drill size. They work well on my Marlin 60. I was concerned about the thin wood on the fore piece, but came in about 2" from the end and the screw came in about flush with the underside. No contact with the tube. This might change if you countersink(which I didn't). I doubt it, though. There appears to be a bit of headroom between the tube and the wood. And you can always cut down that machine screw stud and drill and epoxy the nut in there.
3 Stars By Mike on 2017-09-13
I dont like how the wood screw has a flat end
I dont like how the wood screw has a flat end. Wood screw SHOULD have pointed ends. The flat end requires you pre drill deeper than the length of the screw since it cannot pierce through wood with no point.
5 Stars By Robert F. on 2017-03-26
I have used this kit from Uncle Mikes on several of my guns. I used this one on my CZ 712 semi auto shotgun. I had to drill the cap and shorten the stud then screw the nut on with some Loctite. Works perfectly.
5 Stars By Brain Damage on 2017-07-24
Seems to be good quality.
Standard sling mounts. One long and one short for screwing into wood, and one threaded with a nut which I used on an M1A to mount my bipod to. Seems to be good quality.
3 Stars By Russ Mann on 2017-06-29
It would gave at least been nice to know the hole size needed
Doesnt come with any instructions or glue.It would gave at least been nice to know the hole size needed. Does the job and shipped quickly.
5 Stars By Wayne L. on 2017-08-19
So far these screws have work great.
These swivel screws hold my sling on my rifle very securely. I would suggest that unless you are really skilled in this type of work, Take your rifle to a gunsmith because one slip could deface a once beautiful stock.
5 Stars By Craig J. Carvalho on 2017-03-27
Just what I needed. Worked very well. Still have the longer screw-in type stud for a future project. Thanks!
5 Stars By no on 2017-03-24
worked fine on my Ithica 37a fast shipping good product recommend ...
worked fine on my Ithica 37a fast shipping good product recommend seller and products
5 Stars By D3 on 2017-03-18
The worked well for the application installed on my new rifle. Great price.