Packing List

Swing arm holder:1set

Screw assembly:1set

Nail-free Strong adhesive screws:2pcs

Materials：SUS304 stainless steel+Strong adhesive

Quality Assurance Period：2YER

SIZE:Please look at the picture of dimension

INSTALL BY DRILLING

1.Mark the position of the holes for drilling on the wall according to the hole position on the plate.

2.Drill holes on the wall，drill 2 Φ6mm*30mm holes on the wall

3.Insert the expansion screws into the holes and make them inside the wall

4.Place the plate onto the wall, Make sure that the holes on the plate and the holes on the wall are

at the same place. Insert the inner bushing into the screw and use a screwdriver to tighten them into

the expansion screw holes and finally install the decorative cover.

5.Put the swing rack into the tube to finish the installation

INSTALL BY NAIL-FREE STRONG ADHESIVE SCREWS

1.Wipe the surface to remove oil, Water and dust

2.Remove the nut and fix it on the hole of the object to be installed. Use the pencil to mark around the

surface of the product,Remove the object to be installed, Tear off the protective sticker, Align the mark,

And squeeze it with a rag. Press out the residual air between the adhesive and the wall

3.Paste the hook one by one

4.Put on the screws one by one

5.Test the hook by your hand.Check that the installation is secure

6.Put the swing rack into the tube to finish the installation

MUST WAITING LEAST 12 HOURS ,SUGGEST 24 HOURS,

BECAUSE THAT CAN MAKE THE BONDING STRENGTH UP TO THE HIGHEST